The Radial JX62 is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment. It features Radial's award winning 100% discrete, class-A buffers for optimal signal transfer without distortion or artifact and isolated outputs to eliminate hum and buzz caused by ground loops.
Housed in a 1 RU, 19" rack enclosure, the JX62 begins with 6 input channels, all of which are equipped with ¼" input and separate thru for a dedicated amplifier plus a trim control to balance the signal levels. Channels 1 and 2 are supplemented with Drag™ Control load correction to optimize tone when using wired connections. Channels 5 and 6 are equipped with dedicated Radial DI box outputs to send a 'clean' acoustic or bass signal direct to the PA system. Any or all channels may be active at one time and routed to a master bus which offers choice of AB outputs and features an effects loop for pedal trays. Both AB outputs are transformer isolated to eliminate ground loops and equipped with ground lift switch and polarity reverse to phase align amps if reversed. Both XLR and ¼" outputs are available for greater flexibility. Switching between outputs may be done from the front panel via an optional Radial JR2 remote footswitch.
For the stage tech, the JX62 sports a PFL (pre-fade-listen) and headphone amp that enables any or all inputs to be monitored without affecting the output. A separately buffered tuner/monitor output on the front panel follows the PFL select and may be used for quiet tuning.
Using the JX62 with a guitar rig
The JX62 is the ultimate instrument and amp selector for a busy rock star! Connect four wireless guitars and then switch between two amps using the optional JR2 footswitch. Add a couple of acoustics with direct outs to the PA system.
Using the JX62 with a bass setup
Use the JX62 to switch between your favorite electrics and an upright. Channels 5 and 6 have direct outs to feed the PA system, eliminating the need for external direct boxes. Use the optional JR2 to mute the basses when tuning or switching instruments.
Using the JX62 with a multi-instrumentalist
With six inputs, the JX62 makes it easy to switch between six instruments on stage. Individual trim controls let you match the signals for the perfect balance. Use the direct outs with some Radial DI boxes if you have channels to spare!
Receive weekly news of special offers, discounts, new products and promotions.
You can unsubscribe at any time.
Rich Tone Music Ltd is a company registered in England with company number 05285423 and VAT Number 870 3855 09