Isolation is more than fixing ground loops.Ground loops cause hum, and the solution is to break the unwanted ground path. Isolation is the best way to do it. Unlike other power supplies, Pedal Power 2 Plus isolates EVERY output. This eliminates tone...

A revamp of the DCB10, this power supply handles twice the power and comes with eight 9v outputs, each equipped with a red LED to indicate a short, and two 18v outputs. This pedal can be powered by the included ECB009 18-volt adapter. THE LONG STORY Keep...

This power supply is light and pedalboard-friendly with ten fully isolated outputs ranging from 9V to 18V-including two variable 6V–15V outputs-and special noise-reduction circuitry for quiet operation. This pedal can be powered by the included...

Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need-all while taking up less space than a candy bar. This...

The PSA series is the recommended power supply for products including all new BOSS Compact and Twin pedals, Multi-effects and more. 500 mA of current to easily power multiple pedals, even digital ones Power cable length is increased to almost 10...

This AC adapter provides 9V DC current for most pedals requiring 9 volts of power. Check specifications to make sure this adapter is the right fit for your pedal.

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more...

A cable with a 2.1mm right angle barrel and a 3.5mm right angle mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and...

For pedals with higher voltage requirements, use this voltage doubling adapter with a 2.1mm jack to combine two Pedal Power outputs to make 18V or 24V. Ideal for MXR Flanger and Dime Distortion, Crybaby 535Q, various Fulltone and Keeley products.This...

This splitter adapter cable divides one Pedal Power output to two pedals. The splitter has two 2.1mm jacks which will connect to any 2.1mm plug. The white stripe cable is ground lifted to eliminate ground loops.Power Supply Connector: 2.1mm Straight...

For pedals with higher voltage requirements, use this voltage doubling reverse (center positive) cable with a 2.5mm straight barrel end to combine two Pedal Power outputs to make 18V or 24V. Ideal for Electro-Harmonix Deluxe Memory Man, Stereo Memory...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more...

The most widely used cable with 2.1mm right angle connectors on each end and standard (center negative) polarity.Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more.Power Supply...

Key FeaturesAdds 4 isolated 9V DC outputs to compatible Pedal PowerCompatible with Pedal Power 3, ISO-5, Digital, 4X4, and MONDOPowers from any Pedal Power X-Link or 12V 400mA outputUltra-compact, lightweight design for easy mounting to any...

The most widely used cable with 2.1mm right angle connectors on each end and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more.Power Supply...

For pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power outputs. (Frequently used to combine outputs 5 & 6 on a Pedal Power 2+ to create a single 9V 500mA output.) This adapter will accept...

CIOKS DC7 Power Supply The DC7 is the thinnest, most flexible and most unique power supply for powering effect pedals currently available. The groundbreaking DC7 has a one-inch (25,4mm) profile and weighs 1.1 pound (500 grams) thanks to the pure 2-stage...

A cable with a 2.1mm right angle and 2.5mm (red) right angle barrel connector and reverse (center positive) polarity designed to power Line 6 DL4/MM4 digital modeling pedals, Eventide Factor, some Electro-Harmonix and Voodoo Lab Pedal Switcher and...

The most widely used cable with a 2.1mm straight and a 2.1 mm right angle connector and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more...

For pedals with higher voltage requirements, use this voltage doubling cable with three 2.1mm straight barrel ends to combine two Pedal Power outputs to make 18V or 24V. Ideal for MXR Flanger and Dime Distortion, Crybaby 535Q, various Fulltone and Keeley...

The battery snap works with any effect that runs on a 9V battery and doesn't have a 9v power supply input, including vintage pedals without power jacks. Connect the battery snap to the battery connection, and plug into a compatible power supply to...

The most widely used cable with 2.1mm right angle connectors on each end and standard (center negative) polarity. Used with a majority of popular pedal brands including Boss, MXR/Dunlop, TC Electronic Nova, Line 6 ToneCore, Ibanez and more.Power Supply...